Most recently described as the "get out of trouble" product, we put the industry's best kept secret under the spotlight.
What is it?
A remote dimming pack that can be installed through a break in the circuit or a junction box.
What does it do?
It dims between 0-300W/VA or 0-1000W/VA of LED, dependent on what wattage you need to dim.
What's the product name?
ZBARLED300 or ZBARLED1000, dependent on what wattage you need.
Does it need special wiring?
No, you can install with existing 3-core and earth.
How do you control it?
With our ZGRIDBARCR. As you can dim from more than one control point on a single circuit with the ZBAR range, you just run your switch wiring as normal and if you would like to install more than one just daisy chain your controllers. It really is that simple.
Common ZBARLED scenarios we come across
Scenario 1: Circuit has been installed and you now need to dim 25+ GU10s, at 7W each. You can't split the circuit because the project is at a decorative finished stage, and you now have no idea how you can dim the lamps flicker-free and silently. This is when the ZBAR range comes into its own. Just give us a call if you are unsure which version you need.
Scenario 2: You need to dim over 150W/VA of LED from more than one point on a single circuit. ZBAR ticks all the boxes for this. Not only can it dim between 0-300W/VA or 0-1000W/VA of LED on a single circuit, but you can also dim from multiple points.
Don't forget The ZBAR range also includes the ZBAR1-10V. This can only dim up to 30 single fittings but also enables multi-point dimming on a single circuit.
For any project specification enquiries or to talk through a LED dimming problem or opportunity give us a call 0345 519 5858.
#TeamZano
